Dedicated to professionals

No products in the basket.

Fermer

How to season the cast iron plate ?

Seasoning is necessary when the plates are new.

Use only vegetale oil.

Use the pad with 3 stacked refills.

Time : 1h – 1h30, excludes preheating.

Setting of the professional crepe maker :

  • Electric crepe maker : preheat the crepe maker, turn the control knob to 250°C.
  • Gas thermostat-controlled crepe maker : turn the control knob to position 6.
  • Gas manual control crepe maker : turn the control knob to position 8 (6 mins), then turn down to 2 (4 mins). Season on position 2.

Respect the preheating time before starting seasoning.

Seasoning

  • Coats 1 to 4 : pour 1 teaspoon of vegetable oil on the plate. Spread the oil evenly using the pad. Heat for 5 to 10 minutes until there is no more smoke.
  • Coats 5 to 9 : pour 1/2 teaspoon of vegetable oil on the plate. Spread the oil evenly using the pad. Heat for 5 to 10 minutes until there is no more smoke.
  • To finish seasoning, move the pad over the plate with no fat added.
  • Final result : seasoning which looks like varnish and is light chestnut in colour.

How to carry out regular cleaning of professional cast iron plates use crepe maker ?

  • Turn off the crepe maker.
  • Proceed with the following steps on a still warm plate.
  • Pass the abrasive stone in concentric movements.
  • Remove the abrasive stone residue with a cotton cloth.
  • Clean the plate with a damp sponge.
  • Finish by spreading evenly ½ c.c. of oil on the plate.

How to strip back cast iron plates of the crepe maker ?

  • Heat the crepe maker to 250°C.
  • Turn off the crepe maker.
  • Use the abrasive stone on a warm plate to remove excess fat. Do not hesitate to press.
  • Continue with a special metal sandpaper, to expose the cast iron.
  • Remove residues with a cotton cloth.
  • Clean the plate with a damp sponge.
  • Proceed to the complete seasoning of the crepe maker.